One of the best things about a Tristone worktop is how little it asks of you. It is non-porous, so it never needs sealing, and it is renewable, so everyday marks can be dealt with rather than lived with. There are a few habits worth forming, though, especially around heat. This guide covers daily cleaning, stains, scratches, heat, sinks and what to do if something goes wrong.

Everyday cleaning

Tristone recommends a solid surface daily cleaner. For most households, the routine is simply:

  • Wipe up spills as they happen with a soft, damp cloth.
  • At the end of the day, clean the surface with a solid surface daily cleaner and a soft cloth.
  • Dry with a clean cloth if you want to avoid water marks, particularly on dark colours.

Because Tristone is non-porous, liquids sit on top rather than soaking in. That is why it holds an NSF/ANSI 51 certification for food contact and has been tested to ASTM G21, with no fungal or bacterial growth.

What to avoid

  • Harsh chemicals and strong solvents. If in doubt, use only a product made for solid surface.
  • Abrasive scourers on a daily basis. Save the nylon pad for removing light scratches.
  • Cutting directly on the worktop. Always use a chopping board; knives will mark any acrylic surface.

Stains

Tristone is tested to ANSI Z124 for stain resistance, and its non-porous surface means most stains stay on top. Even so, strongly coloured foods and drinks such as turmeric, beetroot, red wine, coffee and tea are best wiped up promptly, especially on pale colours. If a mark has dried on, use your solid surface cleaner and a little patience rather than reaching for something harsher.

Scratches

Solid surface is softer than stone, so it will pick up fine marks over time. The good news is that it is renewable.

  • Light scratches: Tristone recommends its Rejuvenate product with a white nylon pad. Work gently and evenly over the area so the finish stays consistent.
  • Deeper scratches or damage: contact us. Because the material can be refinished, deeper marks can usually be dealt with by a fabricator rather than replacing the worktop.

Marks show most on dark plain colours and least on pale or patterned ones. If you are still choosing, Tristone's Nebula, or "Dark Scratch", colours are dark shades on which scratches show less. See the colour guide.

Heat: the most important habit

Heat is the one thing to be careful with. Tristone's catalogue reports "No Visual Effect" in radiant heat tests and boiling-water resistance under NEMA LD-3, but Tristone does not publish a specific temperature limit for hot pans. Acrylic solid surface in general is more heat-sensitive than granite or quartz, and heat damage is something every solid surface maker asks you to avoid.

Our advice:

  • Always put pans, roasting tins and oven dishes on a trivet, never straight on the worktop.
  • Stand heat-producing appliances such as slow cookers, air fryers, toasters, sandwich makers and coffee machines on a heat-resistant board or mat.
  • Keep a trivet permanently next to the hob so it becomes a habit.
  • Tell us your hob model when you ask for a quote, so the cut-out and installation can be planned properly for a solid surface worktop.

Compared with granite, this is the main trade-off of solid surface. Our Tristone vs quartz vs granite page explains more.

Caring for a Tristone sink

A bonded Tristone sink is easy to clean because there is no rim for dirt to collect in. A few tips:

  • When pouring boiling water into the sink, run the cold tap at the same time.
  • Rinse and wipe the bowl after use, and clean it with your solid surface cleaner.
  • Do not leave hot pans in the sink.

Tristone cast and thermoformed sinks have a 1-year warranty; SYNCRO steel inlay sinks have a 5-year warranty.

Joins

Tristone joins are bonded during installation and are visually seamless, so they need no special care. Clean them as you clean the rest of the worktop. There is no grout or sealant to maintain.

Is sealing needed?

No. Unlike granite, Tristone is non-porous and never needs sealing or oiling.

Looking after the warranty

Tristone sheets carry a 10-year limited warranty from the manufacturer. Following sensible care, especially around heat, is the best way to keep your worktop in good condition. Ask us which warranty applies to your installation, and keep your paperwork somewhere safe.

A quick care checklist

DoDon't
Wipe spills promptlyLeave strong colours to dry on
Use a solid surface daily cleanerUse harsh chemicals or solvents
Use a chopping boardCut directly on the surface
Use trivets for pans and hot appliancesPut hot pans straight on the worktop
Run the cold tap when pouring boiling water into the sinkPour boiling water into an empty sink without cold water
Lift light scratches with Rejuvenate and a white nylon padScrub daily with abrasive pads

Need help?

If something has happened to your worktop, or you are unsure how to deal with a mark, call us on 0845 330 7642 (Monday to Friday 9am to 5pm, Saturday 10am to 2pm) or use our contact and quote form. If you are still choosing, order free samples and try your own cleaning routine on them. You can also read the Tristone FAQs or learn more about Tristone.